Файловый менеджер - Редактировать - /home/lakoyani/e-learn.mltcfiji.com/vendor/khanamiryan/qrcode-detector-decoder/lib/Qrcode/Detector/FinderPatternFinder.php
Назад
<?php /* * Copyright 2007 ZXing authors * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ namespace Zxing\Qrcode\Detector; use Zxing\BinaryBitmap; use Zxing\Common\BitMatrix; use Zxing\NotFoundException; use Zxing\ResultPoint; /** * <p>This class attempts to find finder patterns in a QR Code. Finder patterns are the square * markers at three corners of a QR Code.</p> * * <p>This class is thread-safe but not reentrant. Each thread must allocate its own object. * * @author Sean Owen */ class FinderPatternFinder { protected static $MIN_SKIP = 3; protected static $MAX_MODULES = 57; // 1 pixel/module times 3 modules/center private static $CENTER_QUORUM = 2; // support up to version 10 for mobile clients private $image; private $average; private $possibleCenters; //private final List<FinderPattern> possibleCenters; private $hasSkipped = false; private $crossCheckStateCount; private $resultPointCallback; /** * <p>Creates a finder that will search the image for three finder patterns.</p> * * @param BitMatrix $image image to search */ public function __construct($image, $resultPointCallback = null) { $this->image = $image; $this->possibleCenters = [];//new ArrayList<>(); $this->crossCheckStateCount = fill_array(0, 5, 0); $this->resultPointCallback = $resultPointCallback; } final public function find($hints) {/*final FinderPatternInfo find(Map<DecodeHintType,?> hints) throws NotFoundException {*/ $tryHarder = true;//$hints != null && $hints['TRY_HARDER']; $pureBarcode = $hints != null && $hints['PURE_BARCODE']; $maxI = $this->image->getHeight(); $maxJ = $this->image->getWidth(); // We are looking for black/white/black/white/black modules in // 1:1:3:1:1 ratio; this tracks the number of such modules seen so far // Let's assume that the maximum version QR Code we support takes up 1/4 the height of the // image, and then account for the center being 3 modules in size. This gives the smallest // number of pixels the center could be, so skip this often. When trying harder, look for all // QR versions regardless of how dense they are. $iSkip = (int)((3 * $maxI) / (4 * self::$MAX_MODULES)); if ($iSkip < self::$MIN_SKIP || $tryHarder) { $iSkip = self::$MIN_SKIP; } $done = false; $stateCount = []; for ($i = $iSkip - 1; $i < $maxI && !$done; $i += $iSkip) { // Get a row of black/white values $stateCount[0] = 0; $stateCount[1] = 0; $stateCount[2] = 0; $stateCount[3] = 0; $stateCount[4] = 0; $currentState = 0; for ($j = 0; $j < $maxJ; $j++) { if ($this->image->get($j, $i)) { // Black pixel if (($currentState & 1) == 1) { // Counting white pixels $currentState++; } $stateCount[$currentState]++; } else { // White pixel if (($currentState & 1) == 0) { // Counting black pixels if ($currentState == 4) { // A winner? if (self::foundPatternCross($stateCount)) { // Yes $confirmed = $this->handlePossibleCenter($stateCount, $i, $j, $pureBarcode); if ($confirmed) { // Start examining every other line. Checking each line turned out to be too // expensive and didn't improve performance. $iSkip = 3; if ($this->hasSkipped) { $done = $this->haveMultiplyConfirmedCenters(); } else { $rowSkip = $this->findRowSkip(); if ($rowSkip > $stateCount[2]) { // Skip rows between row of lower confirmed center // and top of presumed third confirmed center // but back up a bit to get a full chance of detecting // it, entire width of center of finder pattern // Skip by rowSkip, but back off by $stateCount[2] (size of last center // of pattern we saw) to be conservative, and also back off by iSkip which // is about to be re-added $i += $rowSkip - $stateCount[2] - $iSkip; $j = $maxJ - 1; } } } else { $stateCount[0] = $stateCount[2]; $stateCount[1] = $stateCount[3]; $stateCount[2] = $stateCount[4]; $stateCount[3] = 1; $stateCount[4] = 0; $currentState = 3; continue; } // Clear state to start looking again $currentState = 0; $stateCount[0] = 0; $stateCount[1] = 0; $stateCount[2] = 0; $stateCount[3] = 0; $stateCount[4] = 0; } else { // No, shift counts back by two $stateCount[0] = $stateCount[2]; $stateCount[1] = $stateCount[3]; $stateCount[2] = $stateCount[4]; $stateCount[3] = 1; $stateCount[4] = 0; $currentState = 3; } } else { $stateCount[++$currentState]++; } } else { // Counting white pixels $stateCount[$currentState]++; } } } if (self::foundPatternCross($stateCount)) { $confirmed = $this->handlePossibleCenter($stateCount, $i, $maxJ, $pureBarcode); if ($confirmed) { $iSkip = $stateCount[0]; if ($this->hasSkipped) { // Found a third one $done = $this->haveMultiplyConfirmedCenters(); } } } } $patternInfo = $this->selectBestPatterns(); $patternInfo = ResultPoint::orderBestPatterns($patternInfo); return new FinderPatternInfo($patternInfo); } /** * @param $stateCount ; count of black/white/black/white/black pixels just read * * @return true iff the proportions of the counts is close enough to the 1/1/3/1/1 ratios * used by finder patterns to be considered a match */ protected static function foundPatternCross($stateCount) { $totalModuleSize = 0; for ($i = 0; $i < 5; $i++) { $count = $stateCount[$i]; if ($count == 0) { return false; } $totalModuleSize += $count; } if ($totalModuleSize < 7) { return false; } $moduleSize = $totalModuleSize / 7.0; $maxVariance = $moduleSize / 2.0; // Allow less than 50% variance from 1-1-3-1-1 proportions return abs($moduleSize - $stateCount[0]) < $maxVariance && abs($moduleSize - $stateCount[1]) < $maxVariance && abs(3.0 * $moduleSize - $stateCount[2]) < 3 * $maxVariance && abs($moduleSize - $stateCount[3]) < $maxVariance && abs($moduleSize - $stateCount[4]) < $maxVariance; } /** * <p>This is called when a horizontal scan finds a possible alignment pattern. It will * cross check with a vertical scan, and if successful, will, ah, cross-cross-check * with another horizontal scan. This is needed primarily to locate the real horizontal * center of the pattern in cases of extreme skew. * And then we cross-cross-cross check with another diagonal scan.</p> * * <p>If that succeeds the finder pattern location is added to a list that tracks * the number of times each location has been nearly-matched as a finder pattern. * Each additional find is more evidence that the location is in fact a finder * pattern center * * @param $stateCount reading state module counts from horizontal scan * @param i row where finder pattern may be found * @param j end of possible finder pattern in row * @param pureBarcode true if in "pure barcode" mode * * @return true if a finder pattern candidate was found this time */ protected final function handlePossibleCenter($stateCount, $i, $j, $pureBarcode) { $stateCountTotal = $stateCount[0] + $stateCount[1] + $stateCount[2] + $stateCount[3] + $stateCount[4]; $centerJ = $this->centerFromEnd($stateCount, $j); $centerI = $this->crossCheckVertical($i, (int)($centerJ), $stateCount[2], $stateCountTotal); if (!is_nan($centerI)) { // Re-cross check $centerJ = $this->crossCheckHorizontal((int)($centerJ), (int)($centerI), $stateCount[2], $stateCountTotal); if (!is_nan($centerJ) && (!$pureBarcode || $this->crossCheckDiagonal((int)($centerI), (int)($centerJ), $stateCount[2], $stateCountTotal)) ) { $estimatedModuleSize = (float)$stateCountTotal / 7.0; $found = false; for ($index = 0; $index < count($this->possibleCenters); $index++) { $center = $this->possibleCenters[$index]; // Look for about the same center and module size: if ($center->aboutEquals($estimatedModuleSize, $centerI, $centerJ)) { $this->possibleCenters[$index] = $center->combineEstimate($centerI, $centerJ, $estimatedModuleSize); $found = true; break; } } if (!$found) { $point = new FinderPattern($centerJ, $centerI, $estimatedModuleSize); $this->possibleCenters[] = $point; if ($this->resultPointCallback != null) { $this->resultPointCallback->foundPossibleResultPoint($point); } } return true; } } return false; } /** * Given a count of black/white/black/white/black pixels just seen and an end position, * figures the location of the center of this run. */ private static function centerFromEnd($stateCount, $end) { return (float)($end - $stateCount[4] - $stateCount[3]) - $stateCount[2] / 2.0; } /** * <p>After a horizontal scan finds a potential finder pattern, this method * "cross-checks" by scanning down vertically through the center of the possible * finder pattern to see if the same proportion is detected.</p> * * @param $startI ; row where a finder pattern was detected * @param centerJ ; center of the section that appears to cross a finder pattern * @param $maxCount ; maximum reasonable number of modules that should be * observed in any reading state, based on the results of the horizontal scan * * @return vertical center of finder pattern, or {@link Float#NaN} if not found */ private function crossCheckVertical($startI, $centerJ, $maxCount, $originalStateCountTotal) { $image = $this->image; $maxI = $image->getHeight(); $stateCount = $this->getCrossCheckStateCount(); // Start counting up from center $i = $startI; while ($i >= 0 && $image->get($centerJ, $i)) { $stateCount[2]++; $i--; } if ($i < 0) { return NAN; } while ($i >= 0 && !$image->get($centerJ, $i) && $stateCount[1] <= $maxCount) { $stateCount[1]++; $i--; } // If already too many modules in this state or ran off the edge: if ($i < 0 || $stateCount[1] > $maxCount) { return NAN; } while ($i >= 0 && $image->get($centerJ, $i) && $stateCount[0] <= $maxCount) { $stateCount[0]++; $i--; } if ($stateCount[0] > $maxCount) { return NAN; } // Now also count down from center $i = $startI + 1; while ($i < $maxI && $image->get($centerJ, $i)) { $stateCount[2]++; $i++; } if ($i == $maxI) { return NAN; } while ($i < $maxI && !$image->get($centerJ, $i) && $stateCount[3] < $maxCount) { $stateCount[3]++; $i++; } if ($i == $maxI || $stateCount[3] >= $maxCount) { return NAN; } while ($i < $maxI && $image->get($centerJ, $i) && $stateCount[4] < $maxCount) { $stateCount[4]++; $i++; } if ($stateCount[4] >= $maxCount) { return NAN; } // If we found a finder-pattern-like section, but its size is more than 40% different than // the original, assume it's a false positive $stateCountTotal = $stateCount[0] + $stateCount[1] + $stateCount[2] + $stateCount[3] + $stateCount[4]; if (5 * abs($stateCountTotal - $originalStateCountTotal) >= 2 * $originalStateCountTotal) { return NAN; } return self::foundPatternCross($stateCount) ? $this->centerFromEnd($stateCount, $i) : NAN; } private function getCrossCheckStateCount() { $this->crossCheckStateCount[0] = 0; $this->crossCheckStateCount[1] = 0; $this->crossCheckStateCount[2] = 0; $this->crossCheckStateCount[3] = 0; $this->crossCheckStateCount[4] = 0; return $this->crossCheckStateCount; } /** * <p>Like {@link #crossCheckVertical(int, int, int, int)}, and in fact is basically identical, * except it reads horizontally instead of vertically. This is used to cross-cross * check a vertical cross check and locate the real center of the alignment pattern.</p> */ private function crossCheckHorizontal($startJ, $centerI, $maxCount, $originalStateCountTotal) { $image = $this->image; $maxJ = $this->image->getWidth(); $stateCount = $this->getCrossCheckStateCount(); $j = $startJ; while ($j >= 0 && $image->get($j, $centerI)) { $stateCount[2]++; $j--; } if ($j < 0) { return NAN; } while ($j >= 0 && !$image->get($j, $centerI) && $stateCount[1] <= $maxCount) { $stateCount[1]++; $j--; } if ($j < 0 || $stateCount[1] > $maxCount) { return NAN; } while ($j >= 0 && $image->get($j, $centerI) && $stateCount[0] <= $maxCount) { $stateCount[0]++; $j--; } if ($stateCount[0] > $maxCount) { return NAN; } $j = $startJ + 1; while ($j < $maxJ && $image->get($j, $centerI)) { $stateCount[2]++; $j++; } if ($j == $maxJ) { return NAN; } while ($j < $maxJ && !$image->get($j, $centerI) && $stateCount[3] < $maxCount) { $stateCount[3]++; $j++; } if ($j == $maxJ || $stateCount[3] >= $maxCount) { return NAN; } while ($j < $maxJ && $this->image->get($j, $centerI) && $stateCount[4] < $maxCount) { $stateCount[4]++; $j++; } if ($stateCount[4] >= $maxCount) { return NAN; } // If we found a finder-pattern-like section, but its size is significantly different than // the original, assume it's a false positive $stateCountTotal = $stateCount[0] + $stateCount[1] + $stateCount[2] + $stateCount[3] + $stateCount[4]; if (5 * abs($stateCountTotal - $originalStateCountTotal) >= $originalStateCountTotal) { return NAN; } return $this->foundPatternCross($stateCount) ? $this->centerFromEnd($stateCount, $j) : NAN; } /** * After a vertical and horizontal scan finds a potential finder pattern, this method * "cross-cross-cross-checks" by scanning down diagonally through the center of the possible * finder pattern to see if the same proportion is detected. * * @param $startI ; row where a finder pattern was detected * @param centerJ ; center of the section that appears to cross a finder pattern * @param $maxCount ; maximum reasonable number of modules that should be * observed in any reading state, based on the results of the horizontal scan * @param originalStateCountTotal ; The original state count total. * * @return true if proportions are withing expected limits */ private function crossCheckDiagonal($startI, $centerJ, $maxCount, $originalStateCountTotal) { $stateCount = $this->getCrossCheckStateCount(); // Start counting up, left from center finding black center mass $i = 0; $startI = (int)($startI); $centerJ = (int)($centerJ); while ($startI >= $i && $centerJ >= $i && $this->image->get($centerJ - $i, $startI - $i)) { $stateCount[2]++; $i++; } if ($startI < $i || $centerJ < $i) { return false; } // Continue up, left finding white space while ($startI >= $i && $centerJ >= $i && !$this->image->get($centerJ - $i, $startI - $i) && $stateCount[1] <= $maxCount) { $stateCount[1]++; $i++; } // If already too many modules in this state or ran off the edge: if ($startI < $i || $centerJ < $i || $stateCount[1] > $maxCount) { return false; } // Continue up, left finding black border while ($startI >= $i && $centerJ >= $i && $this->image->get($centerJ - $i, $startI - $i) && $stateCount[0] <= $maxCount) { $stateCount[0]++; $i++; } if ($stateCount[0] > $maxCount) { return false; } $maxI = $this->image->getHeight(); $maxJ = $this->image->getWidth(); // Now also count down, right from center $i = 1; while ($startI + $i < $maxI && $centerJ + $i < $maxJ && $this->image->get($centerJ + $i, $startI + $i)) { $stateCount[2]++; $i++; } // Ran off the edge? if ($startI + $i >= $maxI || $centerJ + $i >= $maxJ) { return false; } while ($startI + $i < $maxI && $centerJ + $i < $maxJ && !$this->image->get($centerJ + $i, $startI + $i) && $stateCount[3] < $maxCount) { $stateCount[3]++; $i++; } if ($startI + $i >= $maxI || $centerJ + $i >= $maxJ || $stateCount[3] >= $maxCount) { return false; } while ($startI + $i < $maxI && $centerJ + $i < $maxJ && $this->image->get($centerJ + $i, $startI + $i) && $stateCount[4] < $maxCount) { $stateCount[4]++; $i++; } if ($stateCount[4] >= $maxCount) { return false; } // If we found a finder-pattern-like section, but its size is more than 100% different than // the original, assume it's a false positive $stateCountTotal = $stateCount[0] + $stateCount[1] + $stateCount[2] + $stateCount[3] + $stateCount[4]; return abs($stateCountTotal - $originalStateCountTotal) < 2 * $originalStateCountTotal && self::foundPatternCross($stateCount); } /** * @return true iff we have found at least 3 finder patterns that have been detected * at least {@link #CENTER_QUORUM} times each, and, the estimated module size of the * candidates is "pretty similar" */ private function haveMultiplyConfirmedCenters() { $confirmedCount = 0; $totalModuleSize = 0.0; $max = count($this->possibleCenters); foreach ($this->possibleCenters as $pattern) { if ($pattern->getCount() >= self::$CENTER_QUORUM) { $confirmedCount++; $totalModuleSize += $pattern->getEstimatedModuleSize(); } } if ($confirmedCount < 3) { return false; } // OK, we have at least 3 confirmed centers, but, it's possible that one is a "false positive" // and that we need to keep looking. We detect this by asking if the estimated module sizes // vary too much. We arbitrarily say that when the total deviation from average exceeds // 5% of the total module size estimates, it's too much. $average = $totalModuleSize / (float)$max; $totalDeviation = 0.0; foreach ($this->possibleCenters as $pattern) { $totalDeviation += abs($pattern->getEstimatedModuleSize() - $average); } return $totalDeviation <= 0.05 * $totalModuleSize; } /** * @return number of rows we could safely skip during scanning, based on the first * two finder patterns that have been located. In some cases their position will * allow us to infer that the third pattern must lie below a certain point farther * down in the image. */ private function findRowSkip() { $max = count($this->possibleCenters); if ($max <= 1) { return 0; } $firstConfirmedCenter = null; foreach ($this->possibleCenters as $center) { if ($center->getCount() >= self::$CENTER_QUORUM) { if ($firstConfirmedCenter == null) { $firstConfirmedCenter = $center; } else { // We have two confirmed centers // How far down can we skip before resuming looking for the next // pattern? In the worst case, only the difference between the // difference in the x / y coordinates of the two centers. // This is the case where you find top left last. $this->hasSkipped = true; return (int)((abs($firstConfirmedCenter->getX() - $center->getX()) - abs($firstConfirmedCenter->getY() - $center->getY())) / 2); } } } return 0; } /** * @return array the 3 best {@link FinderPattern}s from our list of candidates. The "best" are * those that have been detected at least {@link #CENTER_QUORUM} times, and whose module * size differs from the average among those patterns the least * @throws NotFoundException if 3 such finder patterns do not exist */ private function selectBestPatterns() { $startSize = count($this->possibleCenters); if ($startSize < 3) { // Couldn't find enough finder patterns throw new NotFoundException; } // Filter outlier possibilities whose module size is too different if ($startSize > 3) { // But we can only afford to do so if we have at least 4 possibilities to choose from $totalModuleSize = 0.0; $square = 0.0; foreach ($this->possibleCenters as $center) { $size = $center->getEstimatedModuleSize(); $totalModuleSize += $size; $square += $size * $size; } $this->average = $totalModuleSize / (float)$startSize; $stdDev = (float)sqrt($square / $startSize - $this->average * $this->average); usort($this->possibleCenters, [$this, 'FurthestFromAverageComparator']); $limit = max(0.2 * $this->average, $stdDev); for ($i = 0; $i < count($this->possibleCenters) && count($this->possibleCenters) > 3; $i++) { $pattern = $this->possibleCenters[$i]; if (abs($pattern->getEstimatedModuleSize() - $this->average) > $limit) { unset($this->possibleCenters[$i]);//возможно что ключи меняются в java при вызове .remove(i) ??? $this->possibleCenters = array_values($this->possibleCenters); $i--; } } } if (count($this->possibleCenters) > 3) { // Throw away all but those first size candidate points we found. $totalModuleSize = 0.0; foreach ($this->possibleCenters as $possibleCenter) { $totalModuleSize += $possibleCenter->getEstimatedModuleSize(); } $this->average = $totalModuleSize / (float)count($this->possibleCenters); usort($this->possibleCenters, [$this, 'CenterComparator']); array_slice($this->possibleCenters, 3, count($this->possibleCenters) - 3); } return [$this->possibleCenters[0], $this->possibleCenters[1], $this->possibleCenters[2]]; } /** * <p>Orders by furthest from average</p> */ public function FurthestFromAverageComparator($center1, $center2) { $dA = abs($center2->getEstimatedModuleSize() - $this->average); $dB = abs($center1->getEstimatedModuleSize() - $this->average); if ($dA < $dB) { return -1; } elseif ($dA == $dB) { return 0; } else { return 1; } } public function CenterComparator($center1, $center2) { if ($center2->getCount() == $center1->getCount()) { $dA = abs($center2->getEstimatedModuleSize() - $this->average); $dB = abs($center1->getEstimatedModuleSize() - $this->average); if ($dA < $dB) { return 1; } elseif ($dA == $dB) { return 0; } else { return -1; } } else { return $center2->getCount() - $center1->getCount(); } } protected final function getImage() { return $this->image; } /** * <p>Orders by {@link FinderPattern#getCount()}, descending.</p> */ //@Override protected final function getPossibleCenters() { //List<FinderPattern> getPossibleCenters() return $this->possibleCenters; } }
| ver. 1.4 |
Github
|
.
| PHP 7.4.33 | Генерация страницы: 0 |
proxy
|
phpinfo
|
Настройка